Shelby American Unveils the “Cobra Cammer” Concept

LAS VEGAS – June 3, 2022 – Shelby American, a wholly owned subsidiary of Carroll Shelby International Inc. (CSBI:PK), today unveiled the “Cammer Cobra” concept, a 427 SOHC V8 powered continuation Shelby Cobra Daytona Coupe, at the Carlisle Ford Nationals presented by Meguiar’s in Carlisle, Pennsylvania. The “Cammer Cobra” follows Carroll Shelby’s initial vision for a racecar to compete in the 24 Hours of Le Mans.

Each year, the Carlisle Pennsylvania Fairgrounds hosts Ford fans from across the country and more than 3,200 vehicles on the National Parts Depot Showfield. In addition to the impressive cars and crowds, the weekend includes displays, special themes and automotive celebrities.

“Carroll Shelby wanted to fit a massive Ford big block engine into a Shelby Cobra Daytona Coupe for Le Mans in 1964,” said Gary Patterson, president of Shelby American. “While many know that a one-off car was built with a 427 ‘wedge’ Ford engine, that was not Carroll Shelby’s initial vision. He hoped to pair the sleek aerodynamics of the Peter Brock designed body with the incredibly powerful aluminum single overhead cam version of the FE motor. Since it was impossible to obtain one of those rare engines in time for the race, Shelby American installed the NASCAR version. Our concept car was built to realize Carroll’s initial Cammer vision.”

Often called “Ford’s greatest engine”, the Single Overhead Cam (SOHC) V8, was based on Ford’s 427ci side-oiler block. The engine was intended to be Ford’s two-valve, single-overhead-cam, high-rpm answer to Chrysler’s 426 Hemi for NASCAR in 1964.

“It is essentially a single-overhead-cam conversion of Ford’s 427ci FE V8,” said Vince LaViolette, Shelby American Vice President of Operations. “The heads were predominantly cast-iron, though later aluminum heads were available, with a roller chain cam-drive. The block had revised oiling and cross-bolted main bearing caps were added to handle the increased rpm. The Ford 427 Cammer churned out 616 horsepower with a single four-barrel carburetor and 657 horsepower with dual four-barrel set up. It was one of the most powerful engines to come out of Detroit during the period.”

In 1964, Carroll Shelby tasked fabricator John Ohlsen with lengthening the chassis of one of the six Daytona Coupes (CSX2286). Shelby planned to replace the 289 c.i.d. Ford engine with the SOHC motor. The experimental racecar was supposed to be Shelby’s “secret weapon” for the 1964 Le Mans race. However, it was impossible to secure the SOHC motor in time and a reliable, high-performance NASCAR 427 was used instead. Weighing about 2,200 pounds with world class aerodynamics and the power of a big block, the car had tremendous performance potential; it was thought capable of going 200+ miles per hour at Le Mans.

However, the car did not make the race and never ran a lap with the 427. Shelby American returned the car to small block configuration.

“The Shelby Cobra Daytona Coupe program still achieved great success without the big block and won its class at Le Mans in 1964,” said LaViolette. “The next year, Shelby American took the FIA World Sports Car Championship with the Coupe and roadsters rolling over the competition.”

The continuation big block Shelby Daytona Coupe follows the same specs as the Ohlsen modified racecar. It has an aluminum body over a 3-inch lengthened chassis with a hood modified to accept the aluminum 427 SOHC big block motor. The 650-horsepower engine is mated to a period-correct 4-speed manual transmission. The car was assigned Shelby serial number CSX2623 and will be documented in the official Shelby Registry.

The Carlisle Ford Nationals is celebrating Shelby American’s 60th anniversary this year. Festivities include the concept vehicle introduction, factory display and Team Shelby East Coast Grand Nationals integration. Patterson introduced the Shelby concept car, surrounded by Team Shelby members, at 3 PM ET on Friday, June 3. The event was open to the media and public.

“This concept is a tribute to the Shelby Cobra Daytona Coupe, one of the most celebrated cars in automotive history,” said Patterson. “It answers the question of ‘what if’ for everyone who shared Carroll’s dream and will gauge demand for a limited series of the vehicle. We plan to exhibit the Cammer Concept throughout the year in celebration of our 60th anniversary.”

Source : Shelby American